得力DL-581P热敏打印机描述符(多接口)
本文地址:http://tongxinmao.com/Article/Detail/id/305
=========================== USB Port12 =========================== Connection Status : 0x01 (Device is connected) Port Chain : 1-12 ======================== USB Device ======================== +++++++++++++++++ Device Information ++++++++++++++++++ Device Description : USB 打印支持 Device Path : \\.\usb#vid_4348&pid_5584#pptii-a-lseco#{a5dcbf10-6530-11d2-901f-00c04fb951ed} Device ID : USB\VID_4348&PID_5584\PPTII-A-LSECO Hardware IDs : USB\VID_4348&PID_5584&REV_0000 USB\VID_4348&PID_5584 Driver KeyName : {36fc9e60-c465-11cf-8056-444553540000}\0116 (GUID_DEVCLASS_USB) Driver : C:\Windows\system32\DRIVERS\usbprint.sys (Version: 6.1.7600.16385 Date: 2009-07-14) Driver Inf : C:\Windows\inf\usbprint.inf Legacy BusType : PNPBus Class : USB Class GUID : {36fc9e60-c465-11cf-8056-444553540000} (GUID_DEVCLASS_USB) Interface GUID : {a5dcbf10-6530-11d2-901f-00c04fb951ed} (GUID_DEVINTERFACE_USB_DEVICE) Service : usbprint Enumerator : USB Location Info : Port_#0012.Hub_#0001 Location IDs : PCIROOT(0)#PCI(1400)#USBROOT(0)#USB(12) Container ID : {00000000-0000-0000-ffff-ffffffffffff} Manufacturer Info : Microsoft Capabilities : 0x90 (UniqueID, SurpriseRemovalOK) Status : 0x0180200A (DN_DRIVER_LOADED, DN_STARTED, DN_DISABLEABLE, DN_NT_ENUMERATOR, DN_NT_DRIVER) Problem Code : 0 Address : 12 Power State : D0 (supported: D0, D3, wake from D0) ---------------- Connection Information --------------- Connection Index : 0x0C (12) Connection Status : 0x01 (DeviceConnected) Current Config Value : 0x01 Device Address : 0x1A (26) Is Hub : 0x00 (no) Number Of Open Pipes : 0x02 (2) Device Bus Speed : 0x01 (Full-Speed) Pipe0ScheduleOffset : 0x00 (0) Pipe1ScheduleOffset : 0x00 (0) Data (HexDump) : 0C 00 00 00 12 01 10 01 00 00 00 10 48 43 84 55 ............HC.U 00 00 01 02 01 01 01 01 00 1A 00 02 00 00 00 01 ................ 00 00 00 07 05 02 02 40 00 00 00 00 00 00 07 05 .......@........ 81 02 40 00 00 00 00 00 00 ..@...... ------------------ Device Descriptor ------------------ bLength : 0x12 (18 bytes) bDescriptorType : 0x01 (Device Descriptor) bcdUSB : 0x110 (USB Version 1.10) bDeviceClass : 0x00 (defined by the interface descriptors) bDeviceSubClass : 0x00 bDeviceProtocol : 0x00 bMaxPacketSize0 : 0x10 (16 bytes) idVendor : 0x4348 idProduct : 0x5584 bcdDevice : 0x0000 iManufacturer : 0x01 (String Descriptor 1) Language 0x0409 : "PPTII-A-LSECO" iProduct : 0x02 (String Descriptor 2) Language 0x0409 : " " *!*CAUTION contains space characters only iSerialNumber : 0x01 (String Descriptor 1) Language 0x0409 : "PPTII-A-LSECO" bNumConfigurations : 0x01 Data (HexDump) : 12 01 10 01 00 00 00 10 48 43 84 55 00 00 01 02 ........HC.U.... 01 01 .. ------------------ String Descriptors ----------------- ------ String Descriptor 0 ------ bLength : 0x04 (4 bytes) bDescriptorType : 0x03 (String Descriptor) Language ID[0] : 0x0409 (English - United States) Data (HexDump) : 04 03 09 04 .... ------ String Descriptor 1 ------ bLength : 0x1C (28 bytes) bDescriptorType : 0x03 (String Descriptor) Language 0x0409 : "PPTII-A-LSECO" Data (HexDump) : 1C 03 50 00 50 00 54 00 49 00 49 00 2D 00 41 00 ..P.P.T.I.I.-.A. 2D 00 4C 00 53 00 45 00 43 00 4F 00 -.L.S.E.C.O. ------ String Descriptor 2 ------ bLength : 0x10 (16 bytes) bDescriptorType : 0x03 (String Descriptor) Language 0x0409 : " " *!*CAUTION contains space characters only Data (HexDump) : 10 03 20 00 20 00 20 00 20 00 20 00 20 00 20 00 .. . . . . . . . ------ String Descriptor 3 ------ bLength : 0x28 (40 bytes) bDescriptorType : 0x03 (String Descriptor) Language 0x0409 : "PPTII-A Printer " *!*CAUTION trailing space characters Data (HexDump) : 28 03 50 00 50 00 54 00 49 00 49 00 2D 00 41 00 (.P.P.T.I.I.-.A. 20 00 50 00 72 00 69 00 6E 00 74 00 65 00 72 00 .P.r.i.n.t.e.r. 20 00 20 00 20 00 20 00 . . . . ---------------- Configuration Descriptor ----------------- bLength : 0x09 (9 bytes) bDescriptorType : 0x02 (Configuration Descriptor) wTotalLength : 0x004E (78 bytes) bNumInterfaces : 0x01 bConfigurationValue : 0x01 iConfiguration : 0x00 (No String Descriptor) bmAttributes : 0xE0 D7: Reserved, set 1 : 0x01 D6: Self Powered : 0x01 (yes) D5: Remote Wakeup : 0x01 (yes) D4..0: Reserved, set 0 : 0x00 MaxPower : 0x32 (100 mA) Data (HexDump) : 09 02 4E 00 01 01 00 E0 32 09 04 00 00 01 07 01 ..N.....2....... 01 00 07 05 02 02 40 00 00 09 04 00 01 02 07 01 ......@......... 02 00 07 05 02 02 40 00 00 07 05 81 02 40 00 00 ......@......@.. 09 04 00 02 03 FF 00 FF 00 07 05 02 02 40 00 00 .............@.. 07 05 81 02 40 00 00 07 05 83 03 04 00 01 ....@......... ---------------- Interface Descriptor ----------------- bLength : 0x09 (9 bytes) bDescriptorType : 0x04 (Interface Descriptor) bInterfaceNumber : 0x00 bAlternateSetting : 0x00 bNumEndpoints : 0x01 (1 Endpoint) bInterfaceClass : 0x07 (Printer) bInterfaceSubClass : 0x01 bInterfaceProtocol : 0x01 iInterface : 0x00 (No String Descriptor) Data (HexDump) : 09 04 00 00 01 07 01 01 00 ......... ----------------- Endpoint Descriptor ----------------- bLength : 0x07 (7 bytes) bDescriptorType : 0x05 (Endpoint Descriptor) bEndpointAddress : 0x02 (Direction=OUT EndpointID=2) bmAttributes : 0x02 (TransferType=Bulk) wMaxPacketSize : 0x0040 (64 bytes) bInterval : 0x00 (ignored) Data (HexDump) : 07 05 02 02 40 00 00 ....@.. ---------------- Interface Descriptor ----------------- bLength : 0x09 (9 bytes) bDescriptorType : 0x04 (Interface Descriptor) bInterfaceNumber : 0x00 bAlternateSetting : 0x01 bNumEndpoints : 0x02 (2 Endpoints) bInterfaceClass : 0x07 (Printer) bInterfaceSubClass : 0x01 bInterfaceProtocol : 0x02 iInterface : 0x00 (No String Descriptor) Data (HexDump) : 09 04 00 01 02 07 01 02 00 ......... ----------------- Endpoint Descriptor ----------------- bLength : 0x07 (7 bytes) bDescriptorType : 0x05 (Endpoint Descriptor) bEndpointAddress : 0x02 (Direction=OUT EndpointID=2) bmAttributes : 0x02 (TransferType=Bulk) wMaxPacketSize : 0x0040 (64 bytes) bInterval : 0x00 (ignored) Data (HexDump) : 07 05 02 02 40 00 00 ....@.. ----------------- Endpoint Descriptor ----------------- bLength : 0x07 (7 bytes) bDescriptorType : 0x05 (Endpoint Descriptor) bEndpointAddress : 0x81 (Direction=IN EndpointID=1) bmAttributes : 0x02 (TransferType=Bulk) wMaxPacketSize : 0x0040 (64 bytes) bInterval : 0x00 (ignored) Data (HexDump) : 07 05 81 02 40 00 00 ....@.. ---------------- Interface Descriptor ----------------- bLength : 0x09 (9 bytes) bDescriptorType : 0x04 (Interface Descriptor) bInterfaceNumber : 0x00 bAlternateSetting : 0x02 bNumEndpoints : 0x03 (3 Endpoints) bInterfaceClass : 0xFF (Vendor Specific) bInterfaceSubClass : 0x00 bInterfaceProtocol : 0xFF iInterface : 0x00 (No String Descriptor) Data (HexDump) : 09 04 00 02 03 FF 00 FF 00 ......... ----------------- Endpoint Descriptor ----------------- bLength : 0x07 (7 bytes) bDescriptorType : 0x05 (Endpoint Descriptor) bEndpointAddress : 0x02 (Direction=OUT EndpointID=2) bmAttributes : 0x02 (TransferType=Bulk) wMaxPacketSize : 0x0040 (64 bytes) bInterval : 0x00 (ignored) Data (HexDump) : 07 05 02 02 40 00 00 ....@.. ----------------- Endpoint Descriptor ----------------- bLength : 0x07 (7 bytes) bDescriptorType : 0x05 (Endpoint Descriptor) bEndpointAddress : 0x81 (Direction=IN EndpointID=1) bmAttributes : 0x02 (TransferType=Bulk) wMaxPacketSize : 0x0040 (64 bytes) bInterval : 0x00 (ignored) Data (HexDump) : 07 05 81 02 40 00 00 ....@.. ----------------- Endpoint Descriptor ----------------- bLength : 0x07 (7 bytes) bDescriptorType : 0x05 (Endpoint Descriptor) bEndpointAddress : 0x83 (Direction=IN EndpointID=3) bmAttributes : 0x03 (TransferType=Interrupt) wMaxPacketSize : 0x0004 (4 bytes) bInterval : 0x01 (1 ms) Data (HexDump) : 07 05 83 03 04 00 01 .......
经过KL采集机后:
=========================== USB Port8 =========================== Connection Status : 0x01 (Device is connected) Port Chain : 1-8 ======================== USB Device ======================== +++++++++++++++++ Device Information ++++++++++++++++++ Device Description : USB 打印支持 Device Path : \\.\usb#vid_4348&pid_5584#pptii-a-lseco#{a5dcbf10-6530-11d2-901f-00c04fb951ed} Device ID : USB\VID_4348&PID_5584\PPTII-A-LSECO Hardware IDs : USB\VID_4348&PID_5584&REV_0000 USB\VID_4348&PID_5584 Driver KeyName : {36fc9e60-c465-11cf-8056-444553540000}\0116 (GUID_DEVCLASS_USB) Driver : C:\Windows\system32\DRIVERS\usbprint.sys (Version: 6.1.7600.16385 Date: 2009-07-14) Driver Inf : C:\Windows\inf\usbprint.inf Legacy BusType : PNPBus Class : USB Class GUID : {36fc9e60-c465-11cf-8056-444553540000} (GUID_DEVCLASS_USB) Interface GUID : {a5dcbf10-6530-11d2-901f-00c04fb951ed} (GUID_DEVINTERFACE_USB_DEVICE) Service : usbprint Enumerator : USB Location Info : Port_#0008.Hub_#0001 Location IDs : PCIROOT(0)#PCI(1400)#USBROOT(0)#USB(8) Container ID : {00000000-0000-0000-ffff-ffffffffffff} Manufacturer Info : Microsoft Capabilities : 0x90 (UniqueID, SurpriseRemovalOK) Status : 0x0180200A (DN_DRIVER_LOADED, DN_STARTED, DN_DISABLEABLE, DN_NT_ENUMERATOR, DN_NT_DRIVER) Problem Code : 0 Address : 8 Power State : D0 (supported: D0, D3, wake from D0) ---------------- Connection Information --------------- Connection Index : 0x08 (8) Connection Status : 0x01 (DeviceConnected) Current Config Value : 0x01 Device Address : 0x30 (48) Is Hub : 0x00 (no) Number Of Open Pipes : 0x02 (2) Device Bus Speed : 0x01 (Full-Speed) Pipe0ScheduleOffset : 0x00 (0) Pipe1ScheduleOffset : 0x00 (0) Data (HexDump) : 08 00 00 00 12 01 10 01 00 00 00 40 48 43 84 55 ...........@HC.U 00 00 01 02 01 01 01 01 00 30 00 02 00 00 00 01 .........0...... 00 00 00 07 05 82 02 40 00 00 00 00 00 00 07 05 .......@........ 01 02 40 00 00 00 00 00 00 ..@...... ------------------ Device Descriptor ------------------ bLength : 0x12 (18 bytes) bDescriptorType : 0x01 (Device Descriptor) bcdUSB : 0x110 (USB Version 1.10) bDeviceClass : 0x00 (defined by the interface descriptors) bDeviceSubClass : 0x00 bDeviceProtocol : 0x00 bMaxPacketSize0 : 0x40 (64 bytes) idVendor : 0x4348 idProduct : 0x5584 bcdDevice : 0x0000 iManufacturer : 0x01 (String Descriptor 1) Language 0x0409 : "PPTII-A-LSECO" iProduct : 0x02 (String Descriptor 2) Language 0x0409 : " " *!*CAUTION contains space characters only iSerialNumber : 0x01 (String Descriptor 1) Language 0x0409 : "PPTII-A-LSECO" bNumConfigurations : 0x01 Data (HexDump) : 12 01 10 01 00 00 00 40 48 43 84 55 00 00 01 02 .......@HC.U.... 01 01 .. ------------------ String Descriptors ----------------- ------ String Descriptor 0 ------ bLength : 0x04 (4 bytes) bDescriptorType : 0x03 (String Descriptor) Language ID[0] : 0x0409 (English - United States) Data (HexDump) : 04 03 09 04 .... ------ String Descriptor 1 ------ bLength : 0x1C (28 bytes) bDescriptorType : 0x03 (String Descriptor) Language 0x0409 : "PPTII-A-LSECO" Data (HexDump) : 1C 03 50 00 50 00 54 00 49 00 49 00 2D 00 41 00 ..P.P.T.I.I.-.A. 2D 00 4C 00 53 00 45 00 43 00 4F 00 -.L.S.E.C.O. ------ String Descriptor 2 ------ bLength : 0x10 (16 bytes) bDescriptorType : 0x03 (String Descriptor) Language 0x0409 : " " *!*CAUTION contains space characters only Data (HexDump) : 10 03 20 00 20 00 20 00 20 00 20 00 20 00 20 00 .. . . . . . . . ---------------- Configuration Descriptor ----------------- bLength : 0x09 (9 bytes) bDescriptorType : 0x02 (Configuration Descriptor) wTotalLength : 0x0020 (32 bytes) bNumInterfaces : 0x01 bConfigurationValue : 0x01 iConfiguration : 0x00 (No String Descriptor) bmAttributes : 0xC0 D7: Reserved, set 1 : 0x01 D6: Self Powered : 0x01 (yes) D5: Remote Wakeup : 0x00 (no) D4..0: Reserved, set 0 : 0x00 MaxPower : 0x01 (2 mA) Data (HexDump) : 09 02 20 00 01 01 00 C0 01 09 04 00 00 02 07 01 .. ............. 02 00 07 05 82 02 40 00 00 07 05 01 02 40 00 00 ......@......@.. ---------------- Interface Descriptor ----------------- bLength : 0x09 (9 bytes) bDescriptorType : 0x04 (Interface Descriptor) bInterfaceNumber : 0x00 bAlternateSetting : 0x00 bNumEndpoints : 0x02 (2 Endpoints) bInterfaceClass : 0x07 (Printer) bInterfaceSubClass : 0x01 bInterfaceProtocol : 0x02 iInterface : 0x00 (No String Descriptor) Data (HexDump) : 09 04 00 00 02 07 01 02 00 ......... ----------------- Endpoint Descriptor ----------------- bLength : 0x07 (7 bytes) bDescriptorType : 0x05 (Endpoint Descriptor) bEndpointAddress : 0x82 (Direction=IN EndpointID=2) bmAttributes : 0x02 (TransferType=Bulk) wMaxPacketSize : 0x0040 (64 bytes) bInterval : 0x00 (ignored) Data (HexDump) : 07 05 82 02 40 00 00 ....@.. ----------------- Endpoint Descriptor ----------------- bLength : 0x07 (7 bytes) bDescriptorType : 0x05 (Endpoint Descriptor) bEndpointAddress : 0x01 (Direction=OUT EndpointID=1) bmAttributes : 0x02 (TransferType=Bulk) wMaxPacketSize : 0x0040 (64 bytes) bInterval : 0x00 (ignored) Data (HexDump) : 07 05 01 02 40 00 00 ....@..
上一篇:新北洋 SNBC(非标准USB打印机)描述符
下一篇:Gprinter-GP58MB 佳博热敏打印机USB描述符(U盘+打印机)