orangepi zero 资料
本文地址:http://tongxinmao.com/Article/Detail/id/363
orangepi.org
http://linux-sunxi.org/Xunlong_Orange_Pi_Zero
https://github.com/orangepi-xunlong/OrangePi_Build
全志H2 ARM的Cortex-A7四核
Mali400MP2 GPU
256MB DDR3
1个 USB 2.0 HOST, 1个 USB 2.0 OTG
The board has two LEDs next to DRAM:
A red LED, connected to the PA17 pin.
A green LED, connected to the PL10 pin.
以太网供电
solder 0 Ohm resistors to R29 and R358
网口4/5 POE+ 7/8 POE0
Putting u-boot on SPI NOR
You can define CONFIG_SPL_SPI_FLASH_SUPPORT, CONFIG_SPI_BOOT, CONFIG_SPL_SPI_SUNXI to get SPI flash support. This build of u-boot can boot from MMC, FEL or the SPI NOR FLASH. From the same binary.
Putting u-boot on SPI NOR
You can define CONFIG_SPL_SPI_FLASH_SUPPORT, CONFIG_SPI_BOOT, CONFIG_SPL_SPI_SUNXI to get SPI flash support. This build of u-boot can boot from MMC, FEL or the SPI NOR FLASH. From the same binary.
查看温度
cat /sys/class/thermal/thermal_zone0/temp
GPIO:移植版 用法一样
WiringOP-Zero-master.zip |
http://tongxinmao.com/NetDisk/down/id/237
上一篇:SNBC POS/KIOSK PRINTER USB描述符
下一篇:LINUX OPENOCD+JLINK/STLINK 下载HEX